The Conductivity Cell TB26 are easily installed into process lines and vessels via the integral 3/4 in. NPT threads, submersed directly into lines and vessels via the 1/2 in. NPT backthreads, or inserted into a process line or vessel through a ball valve. The ball valve provides isolation between the sensor and the process, allowing sensor insertion and removal while the line or vessel is full. This is accomplished by using a 1-1/2 in. standard ball valve. A compression fitting with flushing ports allows the operator to wash away any left over process fluid after removing the sensor. The flushing ports also provide a quick and easy place to take a grab sample for calibration. Variable sensor lengths are available for all Model TB26 sensor styles. The hot-tap sensor can be used with the compression fitting and without the ball valve to provide even greater installation flexibility.
- Easy installation, available in hot-tap or inline / submersible configurations
- Measurement ranges from 0 ... 1.999 µS/cm to 0 ... 19.99 mS/cm
- Corrosion resistant 316 stainless steel measurement electrodes
- Pt100 or Pt1000 integral temperature compensation elements
- Anti-blowout lip on hot-tap versions is machined into sensor body
- Interchangeable and replaceable sensor tips
- Maximum temperature 200 °C (392 °F)
- Maximum pressure 1551 kPa (255 psi)